| CONTROLLER NAME | Model No & TYPE | WTC-2XXX-PID |
|---|---|---|
| SIZE | Dimention(WxHxD) mm | 96x96x65, 96x48x110, 72x72x65, 48x48x85 |
| Panel Cutout (mm) | 92x92, 92x44, 68x68, 44x44 | |
| DISPLAY | Upper Lower |
7 segment, 4 digit RED LED display 7 segment, 4 digit RED LED display |
| INPUT | Sensor & Range | PT-100 2w/3w -50 To 400°C J-Type 0 To 400°C K-Type 0 To 1200 °C |
| OUTPUT | Control Output Output Rating |
Relay or SSR Alarm contact (optional) Current : 0 / 4 to 20mA DC (max load 500E) (optional) Voltage :0 to 5 / 10V DC(min load 10K)(optional) 1C/O , 2A, 230V AC 12V DC for Buzzer (optional) |
| Set Point | set point for Temperature, Alarm and Timer
hysteresis, compressor delay if cooing control select |
| Operating Mode | PID/ON-OFF Heat / Cool (for ON OFF CONTROL) |
| Resolution | 1-digit resolution available for PT-100 sensor only |
| Accuracy | ±0.5 °C |
| Power Requirement | 100-260V AC, 50Hz |
| Protection | Relay turn off in case of sensor break or Fail |
| Indication | "OPEN" message display if sensor disconnected & alarm ON with led indication |
| Memory Backup | selectable according to requirement |
| Modbus communication | RS-485 Output Optional |
